Textile Machinery
Industrial Solutions for Modern Textile Manufacturing
A comprehensive range of knitting, pre-treatment, dyeing, finishing, printing, and environmental machinery — engineered for performance, energy efficiency, and precision.
Portfolio
Textile Machinery Portfolio
Our full range of machinery for knitting, pre-treatment, dyeing, finishing, printing, and environmental control — plus spare parts — organized below by category.
Knitting Machines
Four-Ways Computerized Jacquard Cut-Pile Circular Knitting Machine
Designed for high-end clothing and home textile markets, producing a wide range of premium pile fabrics with exceptional fullness and texture.
- Knife hook separation + groove hook design for superior fabric flatness
- 3 to 4 height differences for three-dimensional surface patterns
- Wide pattern design range — flexible and easy to operate
- Produces cotton pile, coral pile, rabbit fur, PV pile, and animal fur fabrics
- Cylinder Dia:
- 30 – 72 inch
- Feeder:
- 18F – 30F
- Gauge:
- 20G – 26G
- Power:
- 4 – 15 KW
- Pile Height:
- 7 – 35 mm
- Fabric Weight:
- 300 – 800 g/m²
- Layers:
- 3
Raschel Warp Knitting Machine — Short Pile Series
Intelligent double-needle bed Raschel machine optimized for short-pile fabrics used in apparel, home textiles, and toys.
- Electronic beam let-off (EBC / EBA) for precise yarn tension control
- Electronic or mechanical take-up; electronic draw-off system
- Block and individual latch needle options for versatile production
- Complete warping-to-knitting integrated solution available
- Gauge:
- E16 / E18 / E20 / E22
- Working Width:
- 90″ – 203″
- Speed:
- 50 – 800 rpm
- Guide Bars:
- 5
- Knock-over Bar Distance:
- 6 – 20 mm
Raschel Warp Knitting Machine — Medium Pile Series
Double-needle bed machine for short-to-medium pile lengths, ideal for lamb pile, Raschel blankets, and plush fabrics.
- Pile height range 10 – 50 mm for medium-depth fabric styles
- Cam disk or electronic jacquard pattern device
- Frequency-controlled main motor for stable high-speed operation
- ISO 9001 & CE certified production
- Gauge:
- E16 / E18 / E20 / E22
- Working Width:
- 90″ – 203″
- Speed:
- 50 – 800 rpm
- Guide Bars:
- 5
- Knock-over Bar Distance:
- 10 – 50 mm
Raschel Warp Knitting Machine With Jacquard Pattern
Six-guide-bar Raschel machine with electronic jacquard capability for intricate pattern pile production.
- 6 guide bars for complex patterned pile structures
- Electronic jacquard system with wide design compatibility
- Precise pile height control from 10 to 50 mm
- Piezo-ceramics or cam disk pattern driving available
- Gauge:
- E18 / E20 / E22
- Working Width:
- 90″ – 203″
- Speed:
- 50 – 700 rpm
- Guide Bars:
- 6
- Knock-over Bar Distance:
- 10 – 50 mm
High-Speed Tricot Single-Needle Warp Knitting Machine
Wide-width tricot machine for high-volume production of lightweight and technical fabrics across apparel and industrial applications.
- Wide gauge range E16–E36 covers lightweight to dense structures
- Working widths up to 298 inches for high-volume output
- Frequency converter main drive for variable speed control
- EBA electronic yarn let-off + EWA electronic take-up device
- Gauge:
- E16 – E36
- Working Width:
- 186″ / 230″ / 248″ / 280″ / 298″
- Guide Bars:
- 2 / 3 / 4
- Max Batching Dia:
- 635 mm
- Let-off Range:
- 50 – 6000 mm/cycle
Double-Needle Bed Raschel Knitting Machine With Electronic Jacquard
High-speed versatile Raschel machine producing raised pile, velvet, and decorative fabrics for furniture, automotive, and shoe industries.
- 12″ touch screen displaying all production data in real time
- Piezo-ceramics jacquard driving — up to 800 r/min
- Power-off protection: pattern preserved on machine stop
- Wide pattern software compatibility for design flexibility
- Machine Type:
- Double-Needle Bed Raschel
- Working Needles:
- Latch needle type
- Short-Pile Thickness:
- 3 – 12 mm
- Jacquard Speed:
- Up to 800 r/min
Pre-Treatment
Singeing, bleaching, mercerizing and open-width wet processing — preparing fabric for flawless dyeing, printing and finishing.
Singeing Machines
A clean, flawless fabric face — before the first drop of dye.
State-of-the-art, fully automatic gas singeing lines that burn off protruding fibres and surface fluff to give a clean, smooth and lustrous fabric surface — the essential first step for even dyeing, sharp printing and high-quality finishing. Available as a standalone singeing range or combined with an integrated desizing unit.
- Water-cooled double-jet burners
- Face & back singeing in one pass
- Three selectable singeing modes
- PLC + touch HMI with recipe memory
- Automatic ignition & flame monitoring
- Optional integrated desizing unit
Onto Free-Guided Fabric
The flame strikes the fabric as it runs freely between two guide rollers — maximum penetration and the cleanest finish.
Onto a Water-Cooled Roller
The fabric is supported on a water-cooled roller while singed, protecting heat-sensitive fibres from thermal damage.
Tangential Singeing
The flame passes tangentially to the surface, trimming only protruding fibres and leaving the base structure untouched.
From greige roll to clean fabric in a single pass
* Optional desizing section: a steam-heated stainless-steel impregnation tank with automatic chemical dosing, filtration and a high-pressure padder removes size in the same continuous pass. A by-pass route lets the line run singeing-only.
- Cleaner, smoother and more lustrous fabric surface
- Significantly reduced pilling — especially on synthetic blends
- Sharper, more even results in dyeing and printing
Intelligent control, built-in safety
- Proportional gas/air mixing for a stable flame at every speed
- Online monitoring of cooling water, burner temperature and air pressure
- Instant gas shut-off and alarm on any flame failure
- Burners move away automatically when the line slows or stops
- Selvedge spark extinguisher; dust-tight brushing & beating chambers
- Machine Width:
- 1600 – 6000 mm
- Speed:
- up to 150 m/min
- Flame Temperature:
- up to ~1300 °C
- Flame Pressure:
- 10 – 25 mbar, adjustable
- Fuel:
- Natural gas
- Drive:
- Multi-motor AC, inverter
- Control:
- PLC + touch HMI, recipe memory
Rotor Spray Unit
Big energy savings. Faster stenters. Rapid payback.
A new-generation alternative to conventional padder impregnation for chemical application before the stenter. High-speed rotating discs atomise water-based finishing chemicals into micron-sized droplets that penetrate deep into the fabric structure — so the fabric enters the stenter carrying far less water. The result: major savings in drying energy, significantly higher stenter speeds and perfectly even chemical distribution.
- Less water & gas in the stenter
- Higher stenter running speed
- Uniform chemical concentration
- Consistent finish in warp & weft
- Speed-synchronised dosing
- Payback within months*
* Depending on the model and application.
How the rotor technology works
Why mills are switching their stenter entry
- Moisture pick-up:
- Low, precisely targeted (padder: fully saturated)
- Water & gas use:
- Significantly reduced drying load
- Stenter speed:
- Higher — no longer limited by drying
- Chemical concentration:
- Uniform, thanks to circulation
- Finish consistency:
- Consistent in warp & weft
Integrated Model
All-in-one unit combining spray chamber and liquid system, installed at the stenter entry.
Split Model
Spray chamber and liquid supply as separate modules for flexible placement in the line.
Compact Model
Space-saving design for chemical application or fabric humidification ahead of the stenter.
Compact Model — New
Updated compact design for straightforward integration into woven-fabric stenter lines.
Set the target — the line does the rest
- Touch-screen HMI: set spraying weight and fabric weight (g/m²) — the system displays the resulting moisture pick-up
- PLC-controlled pumps adjust flow automatically to the set values
- Encoder tracks stenter speed and corrects spray volume in real time
- Purpose-built motor-driven discs for stable, uniform atomisation
- Wireless HMI connectivity for convenient monitoring
- Roller Width:
- 2000 – 3400 mm (tailor-made available)
- Spraying:
- Single side / Double side
- Water Pressure:
- 2 bar
- Compressed Air:
- 4 bar
- Liquid Viscosity:
- up to 130 cP (water-based)
- Control:
- PLC + touch-screen HMI
Chemicals applied
Open-Width Wet Processing
Continuous ranges — from greige to finished fabric.
Bleaching, mercerizing, dyeing, washing and stentering lines for woven, knitted and tension-sensitive fabrics — modular, energy-efficient and configured to your capacity.
Desizing, Scouring & Bleaching Range
Continuous open-width pad-steam line with low-tension impregnation, even steaming and reduced steam use.
Request a quote
Open-Width Bleaching for Knits
Demineralisation and peroxide pad-steam bleaching in open width — consistent white, no creases, no pilling.
Request a quote
Open-Width Mercerizing Range
Chain and chainless mercerizing with tension control — high lustre, higher dye yield and stable shrinkage.
Request a quote
Continuous Pad Dyeing Range
Hot-flue, pad-steam and cold pad-batch (CPB) lines with reduction steamer and soaping washers.
Request a quote
Low-Tension Washing Range
Relax and drum-spray washing for knitted, elastic and sensitive fabrics — less than half the wastewater of conventional lines.
Request a quote
After-Printing Washing Range
Swelling, spray and drum washing that removes thickeners from printed knits and elastics — excellent fastness.
Request a quoteStenter Machines
Heat-setting and drying stenters for woven and knitted fabric — gas, steam or electric heating, servo-driven overfeed.
Request a quoteChemical Dosing & PVA Recovery
Automatic dosing kitchens with pH control, and PVA size recovery of 85–90 % to cut COD and chemical cost.
Send an enquiryDyeing Machines
Multi-Flow Airflow Overflow Dyeing Machine — Single Tube
Entry-level high-temperature, high-pressure airflow dyeing unit for small batch or sampling production with the same low liquor ratio technology as larger models.
- Ultra-low liquor ratio — significant water and energy savings
- National recommended energy-saving and emission-reduction technology
- High-efficiency custom ventilator for gentle fabric transport
- Precise temperature control for consistent color reproduction
- Tubes:
- 1
- Loading Capacity:
- 50 kg
- Main Pump:
- 5.5 KW
- Air Blower:
- 11 KW
Multi-Flow Airflow Overflow Dyeing Machine — 2-Tube
Mid-capacity dual-tube airflow dyeing machine for medium production volumes with superior energy performance and gentle fabric handling.
- Multi-flow circulation for even dye penetration across all fabric types
- Designated MIIT & NDRC recommended energy technology
- Automatic filter cleaning option available
- National High-Tech Enterprise certified design
- Tubes:
- 2
- Loading Capacity:
- 500 – 600 kg
- Main Pump:
- 7.5 KW
- Air Blower:
- 22 KW
Multi-Flow Airflow Overflow Dyeing Machine — 3-Tube
Large-capacity three-tube configuration for continuous industrial dyehouse production with maximum efficiency and minimum water consumption.
- 3-tube parallel processing for uninterrupted production cycles
- Core ventilator technology developed with national research centers
- Listed in Jiangsu Provincial New Products & Technologies Catalog
- Optional automatic filter self-cleaning system
- Tubes:
- 3
- Loading Capacity:
- 750 – 900 kg
- Main Pump:
- 11 KW
- Air Blower:
- 37 KW
Multi-Flow Airflow Overflow Dyeing Machine — 4 & 6-Tube
High-throughput multi-tube configurations for large-scale dyehouses demanding maximum production volume with lowest possible environmental impact.
- 4-tube: 1,000–1,200 kg capacity | 6-tube: 1,500–1,800 kg capacity
- Innovative MULTI-FLOW ECODYE system minimizes liquor ratio
- Dual blower system on 6-tube for balanced airflow
- Recommended as Key Industrial Energy Efficiency Frontrunner by MIIT
- 4-Tube Pump:
- 11 KW
- 4-Tube Blower:
- 22 KW × 2
- 6-Tube Pump:
- 18.5 KW
- 6-Tube Blower:
- 22 KW × 3
Jigger, Jet & Beam Dyeing
Batch dyeing for every fabric — and for yarn.
Jiggers for open-width wovens, jet flow machines for knits and delicate fabrics, beam dyeing and yarn package dyeing — high-temperature, low liquor ratio, built for repeatable shades.
HT Jigger
Fully enclosed high-temperature jigger for open-width woven fabric — up to 140 °C and 0.3 MPa, roll diameter 800–1400 mm.
Request a quote
Atmospheric Jigger
Open-width jigger for woven fabric at atmospheric pressure — pneumatic doors, frame heating, roll diameter 600–1400 mm.
Request a quote
HT Jet Flow Dyeing Machine
High-temperature jet dyeing for knits and wovens — low liquor ratio, high fabric speed and low tension to prevent creasing.
Request a quoteJet Flow for Light Fabrics
Gentle jet dyeing for light and fine fabrics, with nozzle size adjustable directly from the touch screen.
Request a quote
High-Capacity Jet Flow
Around 20 % more fabric load per batch — available in single-tube and double-tube versions.
Request a quoteUniversal Jet Flow
Versatile, cost-efficient jet dyeing across a wide range of fabric weights, with manually adjustable nozzles.
Request a quote
Beam Dyeing Machine
Open-width dyeing on a perforated beam for nylon, polyester, silk-type, stretch, Oxford and warp-knit fabrics.
Request a quoteYarn Package Dyeing Machine
High-temperature package dyeing for yarn — mixed-flow pump, efficient heat exchanger, proportional heating and dosing.
Request a quoteFinishing & Printing
Sanforizing (Pre-Shrinkage Finishing) Machine
Industrial sanforizing machine ensuring near-zero residual shrinkage on woven and knitted fabrics — a critical finishing step for quality textile production.
- Residual shrinkage after treatment: only 0 – 1%
- Maximum pre-shrinkage capacity: 16%
- USA Sanforset rubber belt (2000 × 3962 × 67 mm)
- Siemens Sinamics inverters + S7-200 Smart PLC control
- Germany SEW / Nord main motors; Schneider contactors
- Machine Width:
- 2000 mm
- Working Width:
- 1800 mm
- Speed:
- 5 – 80 m/min
- Steam Pressure:
- 0.5 MPa
- Humidifying Ratio:
- 10 – 15%
- Drive:
- Inverter
- Install Load:
- 43.2 kWh
- Running Load:
- 22 kWh
Rotary Screen Printing Machine — Open-Type Series
High-speed, servo-driven rotary screen printing machine for all fabric types, featuring individual screen head driving and CAN-bus intelligent control.
- Open-type screen head — easy installation and shift changeover
- Servo motor individual driving for ±0.1 mm register precision
- CAN control system with HMI panel for simple operation
- Magnet table with unlimited adjustable rod pressure
- Residue paste return device to reduce pollution
- Printing Width:
- 1850 – 3200 mm (8 size options)
- Colors:
- 8 / 10 / 12 / 14 / 16 / 20 / 24 colors
- Speed:
- 4 – 80 m/min
- Register:
- ±0.1 mm
- Fabric Weight:
- 50 – 600 g/m²
- Heating:
- Steam / Gas / Thermal Oil
Rotary Screen Printing Machine — Classic Series
Reliable heavy-duty rotary screen printing machine with corrosion-resistant alloy construction and universal spare parts compatibility for lower operating costs.
- 104# aluminum alloy casting — heat-treated for precision and longevity
- Tin bronze copper parts — abrasion and corrosion resistant
- Acid-pickled, phosphated steel structure for anti-corrosion protection
- Universal spare parts widely available worldwide
- Printing Width:
- 1620 – 3000 mm (8 size options)
- Colors:
- 8 / 10 / 12 / 14 / 16 / 20 / 24 colors
- Speed:
- 4 – 80 m/min
- Register:
- ±0.1 mm
- Repeat:
- 640 / 820 / 914 / 1018 mm
- Drive:
- Mechanical / Individual
Environmental Systems
Electrostatic exhaust purification for stenters, waste-heat recovery, dust filtration and duct fire safety — cleaner stacks, recovered oil and reusable heat.
Electrostatic Exhaust Purification (ESP)
A clean stack. Oil captured. Heat put back to work.
Hot stenter and dryer exhaust — typically around 140 °C — carries oil mist, smoke, lint and odour. Our electrostatic purifiers cool the gas, strip out fibres and water-soluble contaminants, then charge and collect the remaining oil droplets on a hexagonal honeycomb electric field. The result is a stack that meets emission limits, oil that can be recovered — and, with an integrated heat exchanger, hot process water from heat that would otherwise be lost.
- Hexagonal honeycomb ESP field
- Up to 97.5% purification efficiency
- Automatic targeted cleaning
- Hot water up to 95 °C recovered
- Variable-frequency fan
- Multi-point flame detection
From hot, oily exhaust to a clean stack
* Optional spray tower or cyclonic scrubber for fabrics that release heavy smoke, strong odour or waxy residue. Exhaust is brought below 40 °C before the electric field, where oil droplets condense and are collected most efficiently.
- Pre-filter removes lint and coarse particles and prevents blockage downstream
- Spray section washes out water-soluble impurities with recirculated cleaning water
- Mesh stages hold back steam before the field and residual oil after it
- Fan speed follows the duct pressure — air volume adapts, energy is saved
More collecting surface in a smaller housing
- Hexagonal stainless-steel cells — about 2.6 times the collecting area of round-tube fields in the same space, with lower air resistance
- Smart high-frequency HV power supply matches the field automatically and raises or lowers voltage with operating conditions
- Timed, programme-controlled automatic cleaning keeps efficiency stable between services
- Flame sensors on the inlet duct, cooler and field trigger the damper and steam or water suppression
- Live status on mobile, tablet or PC via remote monitoring
- Purification Efficiency:
- ≥ 97.5%
- Air Volume:
- 24,000 – 60,000 m³/h per unit
- Field Type:
- Hexagonal honeycomb, stainless steel
- Field Inlet Temperature:
- below 40 °C (after cooling)
- Cleaning:
- Automatic, targeted, timed
- Certification:
- CE
Purifier Range
Four layouts — one for every mill and every site.
Horizontal, tower, dual-zone and plume-abatement configurations. Units install on the roof, on a platform or at ground level, and the position of each section is not fixed.
Horizontal ESP Purifier
Compact, high oil recovery and low upkeep — the most widely installed layout for stenter oil smoke, with 200+ units exported.
Request a quote
Tower ESP Purifier
Vertical honeycomb field with automatic lint removal, demister and one-touch cleaning — for fibre spinning, stenter and PVC lines.
Request a quote
Dual-Zone HF Purifier
High-frequency dual-zone field plus cavity heat exchanger: 97.5% purification and 95 °C hot water from the same unit.
Request a quote
Waste-Heat Plume-Abatement Purifier
Removes the visible white plume without steam: exhaust heat is reused to reheat the cleaned gas above 80 °C.
Request a quoteFour sizes from 24,000 to 60,000 m³/h
Length × width × height and operating weight per unit. Larger stenter groups are served by units in parallel.
- 24,000 m³/h:
- 11,610 × 2,090 × 4,150 mm · 6,000 kg
- 48,000 m³/h:
- 12,100 × 2,270 × 4,150 mm · 7,000 kg
- 56,000 m³/h:
- 12,510 × 2,630 × 4,150 mm · 8,000 kg
- 60,000 m³/h:
- 12,510 × 2,990 × 4,150 mm · 9,000 kg
No steam, no cooling tower — the exhaust heats itself
Waste-Heat Recovery
Turn stenter exhaust into hot water and warm air.
Stand-alone recovery units or modules built into a purifier — fitted with automatic cleaning, so heat transfer stays high between services.
Air-to-Air Heat Recovery
Preheats stenter fresh air with exhaust heat — 75%+ exchange efficiency and 15–20% lower stenter energy use.
Request a quote
Air-to-Water Heat Recovery
Cavity-plate exchanger delivers hot water up to 95 °C for dyeing and washing — 85% heat-exchange efficiency.
Request a quote
Cavity Heat Exchanger
Non-contact exchanger that cools 140 °C exhaust below 40 °C while heating water to 95 °C, with proportional flow control.
Request a quote
Flue-Gas Plume Abatement Unit
Modular de-whitening unit using waste heat — no visible stack plume in winter or rain, low air resistance, small footprint.
Request a quoteWhere the stenter's natural gas goes
Share of burner energy before and after an air-to-air recovery retrofit.
- Absorbed by the fabric:
- 28% → 48%
- Absorbed by the housing:
- 23% → 23%
- Lost with exhaust:
- 49% → 29%
- Saves 15–20% of stenter energy consumption
- Less lint and oil build-up in exhaust ducts — lower fire risk
- Mobile targeted auto-cleaning and automatic fire suppression
Cavity plate vs. conventional finned tube
24,000 m³/h of 140 °C exhaust, 2.5 m³/h of 20 °C water, same exchanger volume; fan 18.5 kW at 50 Hz, 800 mm inlet.
- Hot water temperature:
- 95 °C (finned tube: 65.1 °C)
- Air-side pressure drop:
- 280 Pa (finned tube: 750 Pa)
- Heat-transfer coefficient:
- up to 8,000 W/m²·°C
- Heat-exchange efficiency:
- up to 85%
- Treated surface resists oil fouling; automatic cleaning included
- Suitable for high temperature, high pressure and corrosive duty
- Less heat radiated into the workshop
Components & Accessories
Upgrade an existing purifier, or build a new one.
Electric-field modules, high-voltage power and scrubbing units — supplied as replacements or as part of a complete system.
Honeycomb ESP Field
Stainless hexagonal cells with 2.6× the collecting area of round tubes and lower air resistance; timed auto-cleaning.
Request a quote
Smart HV Power Supply
High-frequency high-voltage supply for wet electrostatic precipitation — touch operation, fast spark response, stable output.
Request a quote
HV Generator Unit
Plug-in high-voltage module that adapts voltage to field conditions automatically — reliable, interference-resistant, easy to swap.
Request a quote
Cyclonic Spray Scrubber
Twin cyclone channels cool exhaust from 60 °C to below 40 °C, with integrated water tank and mist separation before the field.
Request a quoteDust Filtration & Fire Safety
Clean workshop air and protected ducts.
Honeycomb Dust-Filtering Unit — JYFO Series
Two-stage honeycomb dust filtration system for continuous air purification in textile, chemical fiber, paper, and tobacco factory environments.
- Stage I: disc filter + fibre compactor for coarse particle removal
- Stage II: honeycomb filter for fine fiber and dust capture
- Integrated with dust-collecting fan, suction box, and rotary nozzle
- Compact structure — low pressure drop, high energy efficiency
- ISO 9001 certified; national invention patent holder
- Unit Types:
- Type I (disc), Type II (honeycomb), Type III (combined)
- Applications:
- Cotton, Hemp, Chemical Fiber, Paper, Tobacco
- Key Components:
- Disc filter, Honeycomb filter, Rotary nozzle, Drum bag
Auto Fire Extinguishing Intelligent Control System for Flue Ducts
PLC-controlled automatic fire detection and suppression system for textile factory flue and ventilation ducts — multistage distributed sensor network with zero-delay response.
- Three sensor types: temperature monitoring, flame detection, wind pressure
- Sensors uniformly distributed at intervals along the entire flue network
- Double insurance on flame sensors — prevents false triggering
- Zero-delay signal transmission from detection to suppression valve activation
- Automatic steam or water valve activation across all flue sections
- Mobile and PC remote monitoring available in real time
- Detection:
- Multi-stage temperature, flame, wind pressure sensors
- Response:
- Zero delay — PLC real-time intelligent control
- Suppression:
- Steam fire extinguisher nozzles / water valves
- Monitoring:
- Multi-way synchronous — mobile & PC compatible
Ultrasonic Embossing & Slitting Combined Line for Spunlace Fabric
Integrated production line combining ultrasonic embossing and precision slitting for converting spunlace nonwoven rolls into finished slit rolls.
- 2 groups × 11 ultrasonic units (22 total) in double-row arrangement
- 10 precision slitting knives with HRC65 hardness cutter roller
- Siemens S7-1200 PLC with MCGS touch panel
- Remote maintenance module for real-time operational monitoring
- NTN / NSK bearings; AIRTAC pneumatic components (Taiwan)
- Width:
- 3500 mm
- Working Speed:
- 3 – 15 m/min
- Design Speed:
- 20 m/min
- Ultrasonic Power:
- 2.6 KW per unit
- Total Installed Power:
- 75.2 KW
- Roller Dia:
- 420 mm
- Max Winding Dia:
- 1200 mm
- Control:
- Siemens PLC 1200
Spare Parts
Wear parts and consumables for dyeing, printing and finishing machinery — supplied to drawing or sample.
Singeing Burners & Bricks
Replacement double-jet burners and silicon-carbide burner bricks for gas singeing machines.
Request a quote
Sanforizing Rubber Blankets
Endless pre-shrinking rubber belts in a heat- and wear-resistant compound, made to your machine size.
Request a quote
Pattern & Dot-Coating Screens
Rotary pattern screens and design drums, plus dot-coating screens for anti-slip finishes — custom designs to sample.
Request a quoteDyeing, Printing & Finishing Spares
Stenter clips and chains, guide rollers, seals, gears and other wear parts — send us your part number or drawing.
Send an enquirySource Machinery Through AKSEL
We connect global buyers with verified textile machinery manufacturers. Tell us your production requirements and we'll identify the right solution.
Send an Enquiry